The boards this targets carry an addressable LED on GPIO16 rather than a
plain LED, so the GPIO25 heartbeat had nothing to drive. Green means
running, blue flashes on each measurement, red means the sensor is
failing, with the most urgent condition winning. A healthy node reads as
dim green with a blue pip once a second, so a stalled or failing one is
obvious with no serial port attached.
Driven from PIO directly rather than via ws2812-pio, whose current
release pins rp2040-hal 0.11 against this project's 0.12. Those are
semver incompatible: cargo would build both HALs and the driver would not
accept our PIO, state machine or pin types. The alternative was pinning
the whole project back a HAL version, for four instructions of PIO.
Generating the waveform in the state machine matters beyond convenience.
The bus tasks preempt the LED task freely, and a CPU-timed WS2812 would
glitch the moment a frame arrived mid-update. The >50 us latch gap needs
no explicit delay either, since repaints are 25 ms apart.
Byte order is a named constant rather than two transposed shifts, because
it is a property of the part fitted and not of the protocol: many parts
sold as WS2812B, along with the WS2811 and SK6812 families, want red
first. These do. The unused ChannelOrder variant stays so the choice, and
the fix if a board differs, is legible.
The task derives everything from existing shared state — the reading's
own timestamp already says when the last measurement landed — so nothing
is published purely to drive an LED.
Colours confirmed on hardware after correcting the channel order; bus
suite still 15/15 and sensor counters clean, so PIO0 disturbs nothing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Oliver Walter